Installation Instructions
Original Instructions
Kinetix VP Low Inertia Servo Motors
with 063…165 mm Frame Size
Catalog Numbers VPL-A0631, VPL-A0632, VPL-A0633, VPL-A0751, VPL-A0752, VPL-A0753, VPL-A1001, VPL-A1002, VPL-A1003,
VPL-A1152, VPL-A1153, VPL-A1303, VPL-A1304, VPL-A1306, VPL-B0631, VPL-B0632, VPL-B0633, VPL-B0751, VPL-B0752, VPL-B0753,
VPL-B1001, VPL-B1002, VPL-B1003, VPL-B1152, VPL-B1153, VPL-B1303, VPL-B1304, VPL-B1306, VPL-B1651, VPL-B1652, VPL-B1653,
VPL-B1654
Summary of Changes
This publication contains new and updated information as indicated in the following table.
About the Kinetix VP Low Inertia Motors
Kinetix® VP low-inertia motors feature single-turn or multi-turn high-resolution absolute encoders, and are available with or without 24V DC
brakes. These compact brushless servo motors meet the demanding requirements of high-performance motion systems.
You are responsible for inspecting the equipment before accepting the shipment from the freight company. Check the items you receive against your
purchase order. Notify the carrier of shipping damage or missing items immediately. Store or operate your motor in a clean and dry location within
the Environmental Specifications
on page 22.
Topic Page Topic Page
Summary of Changes 1 Motor Dimensions (100…165 mm frame sizes) 8
About the Kinetix VP Low Inertia Motors 1 Connector Data 10
Catalog Number Explanation 2 Load Force Ratings 11
Before You Install the Motor 2 Environmental Specifications 22
Functional Safety 4 Motor Accessories 22
Motor Installation 5 Additional Resources 23
Motor Dimensions (063 mm and 075 mm frame sizes) 7
Topic Page
Added the -W and -Q safety catalog number designators to the catalog number Feedback field 2
Added the Functional Safety topic 4
Updated the Relative humidity specification 22
Corrected the shaft-seal kit catalog number for VPL-A100xx and VPL-B100xx motors 22
Added Kinetix 5700 publications to Additional Resources 23
ATTENTION: To avoid personal injury and damage to the motor, do not lift or handle the motor by the motor shaft. The cap on the shaft can come loose and cause
you to drop the motor.
To Next Page
Need help?
General
