Need help?Do you have a question about the allen SSE12 and is the answer not in the manual?
Details the warranty period starting from the purchase date and what Allen covers.
Explains what Allen will do for defective parts and conditions that void the warranty.
States that engines, batteries, and other items are not covered by this warranty.
Clarifies that warranty changes require authorized written consent.
Introduces the manual's structure into four main sections: Safety, Operations, Service, and Parts.
Clarifies that engine and clutch warranties are separate from Allen Engineering's.
Recommends contacting the selling dealer for certified repairs and original replacement parts.
Provides guidelines for ordering parts, emphasizing serial numbers and part numbers.
Explains how model and serial numbers define the machine and its components.
Describes the location of the identification plate and advises recording unit information.
Lists specifications for engine-powered screeds and available accessories.
Compares specifications of Honda GX270 and GX340 engines used in the screed.
Details the procedures and precautions for safely lifting the screed.
Describes how to place and secure the screed on a trailer for transport.
Illustrates the height, width, and lengths of different screed sections.
Covers Proposition 65 warning and federal respiratory hazard regulations.
Explains the meaning of safety notes (DANGER, WARNING, CAUTION, NOTICE) and hazard symbols.
Covers protective gear, conduct, and hazard avoidance during operation.
Addresses engine operation, fuel handling, cooling, and hot component safety.
Details safety procedures for transporting, towing, and cleaning the equipment.
Addresses safe disposal practices and engine emission compliance.
Presents data on sound pressure and vibration levels measured for the equipment.
Lists essential pre-operation checks for bolts, nuts, hydraulics, and forms.
Discusses job site, form, concrete mix, and weather factors for operation.
Outlines crew training, operation techniques, and essential tools.
Describes procedures and precautions for safely lifting and handling the screed.
Provides step-by-step instructions for correctly assembling engine-driven screed sections.
Illustrates and explains the proper method for attaching winch cables to form stakes.
Explains how to identify the left, right, front, and rear of a screed section.
Illustrates and provides steps for correctly mounting a standard end handle.
Outlines the steps for properly mounting the engine onto the screed.
Provides essential steps for string lining the screed for accurate alignment.
Lists maintenance procedures for improving machine life, including lubrication and checks.
Information on service, part ordering, and factory application of materials.
Illustration and parts list for the engine mount assembly.
Illustration and parts list for the 2-foot screed section.
Illustration and parts list for the 2.5-foot screed section.
Illustration and parts list for the 5-foot screed section.
Illustration and parts list for the 7.5-foot screed section.
Illustration and parts list for the 10-foot screed section.
Illustration and parts list for the end handle assembly.
Illustration and parts list for the winch assembly.
Illustration and parts list for the hydraulic winch assembly.
Illustration and parts list for the flex coupler assembly.
Illustration and parts list for the U-joint assembly.
Illustration and parts list for the crown invert bracket assembly.
Illustration and parts list for the end mount engine assembly.
Identifies decals for the standard SSE12 screed, including part numbers.
Identifies decals for the hydraulic SSE12 screed, including part numbers.
Lists revisions made to the manual with dates, references, and who made them.
General| Brand | allen |
|---|---|
| Model | SSE12 |
| Category | Construction Equipment |
| Language | English |
To Next Page
