allen SSE12 - Attaching Winches to Form Stakes

SECTION 2
OPERATIONS
050362Page 36
Thegurebelowillustratestheproperwaytoattachthewinchcablestotheformstake.Thisistheonlyway
that the cables should e attached. IF the cables are not attached properly, the cables could snap loose causing
severeinjurytonishingpersonnelsurroundingthescreed.
To attach the winch cables properly, adhere to the following instructions.
• Take the cable and go around the last form stake. Make sure that you go underneath the form.
• Attach the cable hook to the next form stake from the end.
Attaching Winches to Form Stakes