allen SSE12 - Parts Identification and Ordering; Factory Service Information & Part Ordering

SECTION 4
PARTS
050362Page 44
This section contains the illustrated drawings and parts list for help in identifying and/or ordering replacement parts for your
machine. Follow the instructions in the front section of this manual “Ordering Parts” when ordering replacement parts to
insure prompt and accurate delivery.
All set screws have blue (LOC-TITE™) applied at the
factory. If set screw is removed or loosened for any
reason re-apply blue (LOC-TITE™).
AllgreasettingsarecappedwithCAPPLUGGC-5
(AECPN015692)toprotectthetting.Ifcapbecomes
missing or damaged replace it as soon as possible.
Anti-Seize is applied at the factory to drive line couplings,
and moving components. If these parts are disassembled re-apply a light
coat of a graphite based anti-seize.
Factory Service Information