AM81687-A
Original Instructions – English
14
Starting & Stopping
Starting
Turn the key switch / disabling device clockwise to position “1”. The red LED will illuminate. An
audible click can be heard this is the contactor powering up the high voltage circuit.
Stopping & Disabling device
The key switch cuts power to the motor controllers. When the key is in “0” position or removed the
cylinder and land drive will not operate.
Battery-operated products do not have to be plugged into an electrical outlet; therefore, they are
always in operating condition. Be aware of possible hazards when using the lawnmower, always
remove the key switch / disabling device when leaving the lawnmower unattended and never let
children play with the machine. Following this rule will reduce the risk of serious injuries.
To Next Page
Loading...
