AM81687-A
Original Instructions – English
19
For all other turf maintenance cartridges:
1) Adjust and lock the bolt on the height setting bar to your desired working height or depth
2) Tilt the mower back and wedge securely
3) With the height setting bar near one edge of the cartridge, position one end against the rear roller
4) Adjust the front roller so that it contacts the height setting bar and the head of the bolt lines up
with the blade/tine/bristle
5) Move the height setting bar to the other end of the cartridge and repeat steps 3 & 4
To Next Page
Loading...
