AM81687-A
Original Instructions ā English
24
Delivery plate and fins
The delivery plate on the cylinder cartridge and the grass deflector veins can be adjusted to alter the
grass trajectory into the grass box.
1) Loosen the 4 delivery plate screws
2) Adjust the delivery plate up or down then tighten the screws
3) Loosen each grass deflector locking screw
4) Individually adjust the deflector left or right then tighten the screws
9.0 Vibration reduction
Best practices for reducing vibration emission:
A well-maintained mower with an accurately ground and balanced cylinder are recommended to
limit vibration emission. Forcing the mower to cut longer grass than intended or setting cartridges to
work at great depths or on unsuitable surfaces will result in higher levels of vibration and wear.
To Next Page
Loading...
