AM81687-A
Original Instructions – English
17
Selecting slow mode
For easy and controlled turns press the handle bar mounted SLOW MODE SWITCH. The green LED
will illuminate to notify you that Slow mode has been engaged. This slows the mowers forward
speed allowing you to make a controlled turn. To return to normal forward speed for mowing press
the slow mode switch again.
Applying the park brake
To apply the park brake pull the RED lever towards you and secure in place with the screw lock.
Adjustments & Maintenance
STOP - Remove the key and the batteries before making any adjustments and wear gloves if
you are working near the blades
Note: To ensure long and reliable service, carry out the following maintenance regularly. Regularly
check for obvious defects such as a loose, dislodged or damaged blade, loose fixings, and worn or
damaged components. Check that covers and guards are undamaged and correctly fitted. Carry out
necessary maintenance or repairs before using. Clean the exterior of the machine thoroughly
using a soft brush and cloth. Do not use water, solvents or polishes. Remove all debris, especially
from around the motor. If the mower should happen to fail despite the care taken in manufacture
and testing, repair should be carried out by an Approved service agent.
To Next Page
Loading...
