Installation
Pallet Removal
The machine is delivered bolted onto the transport pallet and
packed in shrink-wrap foil or box.
1. Remove packing from machine.
2. Remove front and rear panel.
3.
Remove bolts between machine and pallet.
4. When machine is lifted off pallet, make sure the machine does
not come down on the floor with either of the rear corners
first. The machine's side panel can be damaged.
NOTE: Two self-adhesive rubber stop-blocks are
supplied with the machine. They may be applied as
paint protection when opening the door.
Installation
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
30 Part No. D1599ENR16
To Next Page
Loading...
