Alliance Laundry Systems HWTT20*N - Coin Slide Can Not Fully Insert

40 39201
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Troubleshooting (Coin Slide Operated/Non-Metered Models with “8” or “9” in 4th Character of Model No.)
20. Coin Slide Can Not Fully Insert
Coin slide can't be
fully inserted.
Make sure switch
activation lever is off
switch when installing
coin slide.
Is coin slide
installed
correctly?
Refer to Installation
manual. Make sure
all four mount screws
are engaged into
meter case opening.
Tighten extension rod
correctly.
No
TLW1836B
Are wires
and/or shield
from control
board interfering
with coin slide
movement?
Reposition wires
and/or shield.
Yes
No