Alliance Laundry Systems HWTT20*N - No Cycle Start When the Coin Slide Is Activated

44 39201
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Troubleshooting (Coin Slide Operated/Non-Metered Models with “8” or “9” in 4th Character of Model No.)
24. No Cycle Start When the Coin Slide is Activated
Cycle won't start after the
coin slide is activated.
Is the "In Use"
light lit?
Refer to
Washer Will
Not Fill
paragraph.
Yes
Is the H8
connection
properly seated
on the control
board?
Properly seat
connector and
try again.
No
Is coin slide
switch
activated when
slide is pushed
in?
Replace or
repair slide
extension
assembly.
No
Replace control
harness.
TLW342S
Is there
continuity
through switch
when
activated?
Replace
switch.
Replace
control.
Is there continuity
through switch and
switch wires when
activated?
Yes
No
1
Yes
2
No
3
Yes
Yes
No