39201 73
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Troubleshooting
MDC Models
40. MDC Error Code Listing
NOTE: For all other card reader errors, consult the card reader manufacturer.
To reduce the risk of electric shock, fire, explosion, serious injury or death:
• Disconnect electric power to the washer before servicing.
• Never start the washer with any guards/panels removed.
• Whenever ground wires are removed during servicing, these ground wires must be
reconnected to ensure that the washer is properly grounded.
W003
WARNING
E:dr Maximum drain time exceeded or water sensed at the end of a spin step.
E:FL Maximum fill time exceeded.
Card Reader Machines: (In addition to the above errors)
EC:19 Indicates no card reader communication. The control and the card reader cannot communicate.
Check card reader, control and harness.
To Next Page
Loading...
