36198 51
25. Control Configuration “CFg”
This option allows the user to turn ON or turn OFF
preprogrammed capabilities within the Electronic
Control.
How to Program the Control Configuration
1. Control must be in Special Mode. Refer to Section
VII.
2. While pressing and holding the PERM PRESS
keypad with one hand, press the COLD keypad
with the other hand. Programmable option number
one, “SIg”, will appear in the VFD. See Figure 76.
3. Press the DELICATES (+) pad or the COLD (-)
pad to scroll through the programmable options
until “CFg” appears in the VFD. See Figure 77.
4. When “CFg” appears in the VFD, press the PERM
PRESS pad. A three digit number will appear in the
VFD.
NOTE: The number appearing in the VFD is the
current number that was previously selected from
Chart 5. DO NOT select a number that is not listed
in Chart 5.
5. Locate the desired three digit number in the first
column of Chart 5.
6. Press the DELICATES (+) or the COLD (-) keypad
to increase or decrease the current three digit
number to the desired three digit number selected
from Chart 5. See Figure 78.
7. Press the PERM PRESS (enter) keypad when the
correct number appears in the VFD. The next
option, “CIn”, will appear in the VFD.
NOTE: To program “CIn” (Set Real Time Clock
Minutes), see option 26. To program other options,
refer to the appropriate section.
How to Exit Programming Feature
1. Be sure service door has been opened and closed.
Refer to Section VI.
2. Be sure the control shows a programmable option,
not a value.
3. While pressing and holding the PERM PRESS
keypad with one hand; press the COLD keypad
with the other hand. The control will revert back to
the “Ready” mode. See Figure 2.
Figure 76
Figure 77
WASH
RINSE SOAK
SPIN
PRICE TIME REMAINING
INSERT COINS UNBALANCE
C105IE1A
WASH
RINSE SOAK
SPIN
PRICE TIME REMAINING
INSERT COINS UNBALANCE
C130IE1A
Figure 78
NORMAL
HOT
DELICATES
COLD
PERM
PRESS
WARM
Press this pad (enter)
to choose a selected
value or option
Press this pad (+)
to scroll forward or
increase a value
Press this pad (-)
to scroll back or
decrease a value
C106IE1A