ALLIANCE EAJ920 - Rapid Advance Feature; How to Enter Rapid Advance Feature; How to Exit Rapid Advance Feature

36198 69
Section XII
Rapid Advance Feature
The Rapid Advance feature allows the owner to
quickly advance through active cycles or advance into
a cycle from the “Ready” mode.
How to Enter Rapid Advance
Feature
1. Control may be in an active cycle or in the “Ready”
mode to use the Rapid Advance feature.
2. Open the service door. Refer to Section VI. While
pressing and holding the NORMAL keypad with
one hand, press the WARM keypad with the other
hand.
While in the Rapid Advance Mode, pressing the
COLD temperature pad will advance the washer to the
next cycle step. The cycle indicator lights will tell
which cycle the washer is in.
For example: If the washer is in the first fill cycle,
pressing the COLD keypad will advance the washer
into the first Agitate cycle.
Continue pressing the COLD keypad until the cycle is
completed.
How to Exit Rapid Advance Feature
1. Advance through the cycles until reaching the
“Ready” mode. See Figure 2.