Allied Telesis AT-8016F/MT User Manual

47
Chapter 2
Installation
This chapter contains the installation procedures for the switch. The
chapter contains the following sections:
 ”Reviewing Safety Precautions” on page 48
 ”Selecting a Site for the Switch” on page 49
 ”Planning the Installation” on page 50
 ”Unpacking the Switch” on page 52
 ”Installing the Switch in a Rack” on page 53
 ”Installing an Optional GBIC Module” on page 55
 ”Installing an Optional Expansion or Stacking Module” on page 57
 ”Installing an Optional AT-RPS3004 Redundant Power Supply” on
page 60
 ”Cabling and Powering ON the Switch” on page 63
 ”Wiring a DC Powered Unit” on page 68
 ”Starting a Local Management Session” on page 71
 ”Warranty Registration” on page 74

Allied Telesis AT-8016F/MT Specifications

General

Brand	Allied Telesis
Model	AT-8016F/MT
Category	Switch
Language	English