7
Chapter 2
Installation
Before you Proceed
Before installing the AT-FS704, make sure you read “Electrical Safety and
Installation Requirements” on page iii.
Verifying Package Contents
Make sure that the package includes the following items:
❑
One AT-FS704 10/100 Fast Ethernet Switch
❑
One AC power cord (for the U.S., Continental Europe, and the U.K.
only)
❑
Warranty card
❑
This installation guide
❑
Four rubber feet with adhesive backing (for desktop or shelf
installation only)
❑
Wall mounting kit, which includes: two tapping screws and two plastic
anchors
If any of the above items are damaged or missing, contact your representative
immediately.
To Next Page
Loading...
Need help?
General
