AT-RS710TX, AT-RS718TX, and AT-FS708 Switches Installation Guide
5
Note
Since Ports A and B are capable of auto-negotiation, they have no
associated DIP switches. The same reasoning applies to all eight ports
on the AT-FS708 switch.
More details are provided in Chapter 2.
Connectors
Table 2 lists and defines the type of connectors available and their function.
Table 2: Connector Types on Switches
Connector Type Function
Ports A and B
10/100Base-TX, RJ45 connectors
Cascade or uplink port
Ports 1 through 8 or 1 through 16, depending on
model
10Base-T or 100Base-TX, depending on model;
RJ45 connectors
Connecting to a high performance
workstation, server, or hub
To Next Page
Loading...
