Allied Telesis AT-S63 - Page 243

AT-S63 Management Software Command Line Interface User’s Guide
243
❑ Configuration name
❑ Reversion level
❑ Bridge identifier
The PORTCONFIG parameter displays the following MSTP port
parameter settings:
❑ Edge-port status
❑ Point-to-point status
❑ External and internal port costs
❑ Port priority
The PORTSTATE parameter displays the following MSTP port status
information:
❑ MSTP port state
❑ MSTI ID
❑ MSTP role
❑ Point-to-point status
❑ Spanning tree version
❑ Port cost
The MSTI parameter displays the following information for each
spanning tree instance (excluding the CIST) on the switch:
❑ MSTI ID
❑ MSTI priority
❑ Regional root ID
❑ Path cost
❑ Associated VLANs
The CIST parameter displays the CIST priority value and the VLANs
associated with this spanning tree instance.
The MSTIVLANASSOC parameter displays the VLAN to MSTI associations.