Allied Telesis AT-S63 - Clear Snmpv3 Community

AT-S63 Management Software Command Line Interface User’s Guide
251
CLEAR SNMPV3 COMMUNITY
Syntax
clear snmpv3 community index= index transporttag
Parameters
index Specifies the name of an existing SNMPv3
Community Table entry, up to 32 alphanumeric
characters.
transporttag Specifies the transport tag, up to 32 alphanumeric
characters.
Description
This command clears the transporttag parameter in an SNMPv3
Community Table entry.
Examples
The following command clears the value of the transporttag parameter
in the SNMPv3 Community Table entry with an index of 1005:
clear snmpv3 community index=1005 transporttag
The following command clears the value of the transporttag parameter
in the SNMPv3 Community Table entry with an index of 421:
clear snmpv3 community index=421 transporttag