303
Chapter 21
VLANs and Multiple VLAN Mode
Commands
This chapter contains the following commands:
❑ “ADD VLAN” on page 304
❑ “CREATE VLAN” on page 307
❑ “DELETE VLAN” on page 311
❑ “DESTROY VLAN” on page 314
❑ “SET SWITCH INFILTERING” on page 315
❑ “SET SWITCH MANAGEMENTVLAN” on page 316
❑ “SET SWITCH VLANMODE” on page 317
❑ “SET VLAN” on page 319
❑ “SHOW VLAN” on page 320
Note
Remember to use the SAVE CONFIGURATION command to save
your changes on the switch.
Note
For background information on tagged and port-based VLANs,
multiple VLAN modes, and ingress filtering, refer to Chapter 19,
“Port-based and Tagged VLANs” in the AT-S63 Management Software
Menus Interface User’s Guide.
To Next Page
Loading...
Need help?
General
