Allied Telesis IE340-12GP User Manual

C613-50631-01 Rev A Command Reference for IE340 Series 2246
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
AUTHENTICATION COMMANDS
AUTH
SUPPLICANT-IP
Default No supplicant IP address for port authentication exists by default until first created
with the auth supplicant-ip command. The defaults for parameters applied are as
shown in the table above.
Mode Interface Configuration for a static channel, a dynamic (LACP) channel group, or a
switch port; or Authentication Profile mode.
Examples To add the supplicant IP address 192.168.10.0/24 to force authorized port control
for interface port1.0.2, use the commands:
awplus# configure terminal
awplus(config)# interface port1.0.2
awplus(config-if)# auth supplicant-ip 192.168.10.0/24
port-control force-authorized
To delete the supplicant IP address 192.168.10.0/24 for interface port1.0.2, use the
commands:
awplus# configure terminal
awplus(config)# interface port1.0.2
awplus(config-if)# no auth supplicant-ip 192.168.10.0/24
To disable reauthentication for the supplicant(s) IP address 192.168.10.0/24 for
interface port1.0.2, use the commands:
awplus# configure terminal
awplus(config)# interface port1.0.2
awplus(config-if)# no auth supplicant-ip 192.168.10.0/24
reauthentication
To add the supplicant IP address 192.168.10.0/24 to force authorized port control
for auth profile 'student', use the commands:
awplus# configure terminal
awplus(config)# auth profile student
awplus(config-auth-profile)# auth supplicant-ip
192.168.10.0/24 port-control force-authorized
Related
commands
show auth
show dot1x
show dot1x interface
show running-config
<1-65535> The server-timeout period, in seconds, default 3600
seconds.
reauthentication Enable reauthentication on a port.
Parameter Description

Allied Telesis IE340-12GP Specifications

General

Brand	Allied Telesis
Model	IE340-12GP
Category	Switch
Language	English