Allied Telesis x530 Series Quick Installation Guide

x530 Series Quick Installation Guide 13
4. For the x530-52GTXm and x530-52GPXm Switches, attach four
brackets with sixteen screws, as shown here.
Note: If the wall material requires pre-drilled holes, perform steps 4
to 9. Otherwise, go to step 10.
5. Have another person hold the switch on the wall at the selected
location for the device while you use a pencil or pen to mark the
wall with the locations of the screw holes in the brackets.

Allied Telesis x530 Series Specifications

General

Brand	Allied Telesis
Model	x530 Series
Category	Switch
Language	English