4–5. INSPECTING PLUGS AND OPENINGS
Carefully inspect all sides and the bottom of the transmission for loose or missing
plugs.
a. Pressure Plugs. Determine if 0.4375–20 UNF-2A pressure plugs are tightened
to 10–13 N•m (7–10 lb ft).
b. Fluid Drain Plug. Determine that the drain plug is tightened to 25–32 N•m
(18–24 lb ft).
c. Cleanliness. Inspect the openings into which the cooler lines connect for
deformities or obstructions. Inspect the transmission electrical connectors for
cleanliness. Clean electrical connectors with LPS Electro Contact Cleaner
®
only.
58
To Next Page
Loading...
