Wireless-N Broadband Router User Guide
Config File
This feature allows you to download the current settings from the Wireless-N Broadband
Router, and save them to a file on your PC.
You can restore a previously-downloaded configuration file to the Wireless-N Broadband
Router, by uploading it to the Wireless-N Broadband Router.
This screen also allows you to set the Wireless-N Broadband Router back to its factory default
configuration. Any existing settings will be deleted.
An example Config File screen is shown below.
Figure 58: Config File Screen
Data - Config File Screen
Backup Config
Use this to download a copy of the current configuration, and store the
file on your PC. Click Backup to start the download.
Restore Config
This allows you to restore a previously-saved configuration file back to
the Wireless-N Broadband Router.
Click Browse to select the configuration file, then click Restore to
upload the configuration file.
WARNING!
Uploading a configuration file will destroy (overwrite) ALL of the
existing settings.
Default Config
Clicking the Factory Defaults button will reset the Wireless-N Broad-
band Router to its factory default settings.
WARNING!
This will delete ALL of the existing settings.
78
To Next Page
Loading...