Alluris FMI-S Series - Technical Data Specifications; Measuring Range and Display Resolution; Key Performance Characteristics

FMI-B
FMI-S
Bedienungsanleitung
Operation manual
Notice d’utilisation
Instrucciones de servcio
Istruzioni per l’uso
www.alluris.de
Page 30 of 34
7.0 Technical Data
FMI-B10 / FMI-S10 FMI-B20 / FMI-S20 FMI-B30 / FMI-S30 FMI-B50 / FMI-S50
Measuring Range [N] A5 0 - 5
B1 0 - 10
B5 0 - 50
C1 0 - 100
C5 0 - 500
K1 0 - 1000
K2 0 - 2500
K5 0-5000
Resolution of display [N] A5 0,001
B1 0,002
B5 0,05 0,01
C1 0,1 0,02
C5 0,5 0,1
K1 1 0,2
K2 0,5
K5 1
Measuring frequency (internal) up to 3,6 kHz
Display refresh rate 1 - 10 Hz
Peak capturing app. 1 kHz
Accuracy* (f.s. ± 1 digit)
± 0,3 % ± 0,2 % ± 0,15 %
Temperature offset (Tk relative) / K
± 0,02 %
O-Point offset (To absolute) / K ± 0,02 %
Permissible error of measurement** ± 0,5 % ± 0,3 %
Tracking (To surpressed) Auto-Tara (automatic compensation)
Overload output
USB-interface, max app. 1kHz 2.0
Memory function
Statistical function MAX | MIN
AVG | DEV
Limit (threshold) function
Temperature range (operation) 0° ... 40° (max. 85 %rF)
Temperature range (storage) -5° ... 45° (store dry)
Protection code < 500N Protect against small parts (IP40)
Protection code > 500N Splash proof (IP 65)
Power supply FMI-S Solar cell and internal HighCap-buffer
Battery FMI-B
internal LiPo | capacity app. 150 h | charging time 10-12h
Weight 480 g /app. 1150 g (from measuring range 2,5 kN)
Dimensions (L x W x H) 150 x 82 x 29 mm
* Permissible display deviation; **according to DIN 1319