FMI-B
FMI-S
Bedienungsanleitung
Operation manual
Notice d’utilisation
Instrucciones de servcio
Istruzioni per l’uso
www.alluris.de
Page 31 of 34
8.0 Service
8.1. Extended 5-Year Guarantee
We extend the guarantee to five years provided that the instrument
has been registered with us immediately after the purchase, and that
the maintenance and calibration intervals are observed. Consumption
material, normal wear and tear as well as damages caused by impro-
per use are excluded from this warranty. Besides, the warranties as
agreed upon in our general terms and conditions shall apply.
8.2. Product registration
In order to receive information about product changes and updates
and to enjoy full warranty, please register your product on our website.
8.3. Calibration certicates
Force gauges can be calibrated in our certified calibration laboratory
working in accordance with ISO 17025.
Our calibrations can be performed to the following standards and di-
rectives:
• VDI/VDE-Directive 2624 sheet 2.1
• DAkkS (DKD) R 3-3
• ISO 376:2011-09
Traceability to the national standards of PTB / DKD is guaranteed and
will be shown in the calibration certificates.
To Next Page
Loading...
Need help?
General
