Allworx 9212 - End a Call; Headset; Directory Dialing; Redial a Number

Allworx Phone Model 9212/9212L User Guide
+1 866 ALLWORX * +1 585 421 3850 Page 15
www.allworx.com
Version: J Revised: March 2, 2017
4.5 End a Call
• Place the receiver on the hook.
• Press the SPEAKER function button, if using the speaker phone or a headset.
• Press the headset PFK.
• Press another PFK. If a second incoming call is on another PFK, pressing that PFK ends the
current call and answers the incoming call (unless the phone configuration enables auto on
hold).
• Press the RELEASE function button to end a call and start a new call.
4.6 Headset
Press the SPEAKER button to activate the headset, and then press the SPEAKER button again to
disconnect the call.
4.7 Directory Dialing
1. Press the UP / DOWN scroll keys to view a list of all User Extensions, System Extensions, and
Speed Dial numbers by Name or Description. While the handset is off the hook, the rightmost
soft key changes to the directory listing option: PHONEBK. Press to initiate.
2. Use the UP / DOWN scroll keys to highlight the name (or description) and extension or press
the keypad to jump to a specific alphabetic section of the directory. Press SELECT to dial the
number.
4.8 Redial a Number
1. Press the REDIAL soft key on the phone display screen.
2. Press the CALLS soft key. Use the UP / DOWN scroll keys to highlight the call in the display. Press
SELECT .
Note:
The Allworx Server Administrator can create a PFK to activate the headset instead of using the
SPEAKER button.