Phone Guide – 9224
300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com
© 2008 Allworx. All rights reserved
Version 1. Revised: September 9, 2008
Page 10
5.6 Redial a Number
• You can automatically dial the last number called by selecting the REDIAL soft key on the phone’s
display screen,.
• Select the CALLS soft key. Us the Up / Down navigation arrows to highlight the desired call. Press the
Select button .
• A PFK can be programmed by your System Administrator to redial the last number called.
5.7 Missed Calls
If a call is missed, a message will appear on the phone’s display. Use the following steps to see details of the
missed calls:
1. Select the CALLS soft key.
2. Use the Up / Down navigation arrows to view your missed calls.
3. Select the DETAIL soft key to view the date and time of the missed calls.
4. Press the Select button to call the number.
5.8 Presence Soft Key
Change your Presence setting directly from the phone. The Presence states are: ‘In Office’, ‘At a Meeting’, ‘On
Vacation’, ‘On Business Trip’, ‘At Home’, ‘Away’, and ‘Busy’.
1. Select the PRESNCE (presence) soft key.
2. Use the Up / Down navigation arrows to view the presence states.
3. Press the Select button to change your presence. All inbound calls will follow the call route for this
presence state.
5.9 Ignore and Silence Soft Keys
• While a call is ringing, the SILENCE and IGNORE soft key options appear.
• Pressing the IGNORE soft key stops the audible ringing. However, the PFK that the call is coming in on
will continue to flash until the call is answered or the caller hangs up.
• Pressing the SILENCE soft key stops the audible ringing. However, the information on the incoming call
will still be displayed and the PFK that the call is coming in on will continue to flash until the call is
answered or the caller hangs up.
5.10 Programmable Function Keys
The following features can be programmed by your System Administrator into any of the 24 PFKs on the
Allworx 9224. Additional PFKs can be added to the Allworx 9224 by attaching one or more Allworx Tx 92/24
Telephone Expanders (see Allworx Tx 92/24 Telephone Expander Installation Guide for complete details).
Note: One PFK should be left as a Call Appearance. This is required for PBX behavior.
• Busy Lamp Field (BLF)
• Call Appearance
• Call Monitor
• Day-Night Mode
• Centrex Flash
• Headset
• Park
To Next Page
Loading...
