Phone Guide – 9224
300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com
© 2008 Allworx. All rights reserved
Version 1. Revised: September 9, 2008
Page 18
n. Auto on Hold – When another call comes in on a free Call / Line Appearance PFK while on an
active call, if the PFK for the new call is pressed, the first call is automatically put on hold instead of
ended.
i. Enabled
ii. Disabled (Default)
o. Auto Retrieve Calls – When the phone is on hook and a call is on hold, if handset is taken off hook,
the call on hold is automatically retrieved.
i. Enabled (Default)
ii. Disabled
p. Missed Call Tracking – Can choose what types of Appearances to track.
i. Call Appearances Only (Default)
ii. All Appearance Types
q. Parking Orbit Pop-ups – Displays the Parking Orbit after call has been parked.
i. Popup Enabled (Default)
ii. Popup Disabled
r. Hold Button Operation – Set the Hold button functions.
i. Hold then Park
ii. Park then Hold
iii. Hold Calls Park Lines (Default)
s. Force Auto Answer – Allows the phone to automatically answer incoming calls.
i. Normal Operation: Incoming calls are not automatically answered (Default)
ii. Auto Answer: Phone will automatically answer call after one ring
t. Sidetone Disable –Normally only used when connecting a wireless headset to the phone.
i. Normal Operation (Default)
ii. Handset Disabled
iii. Headset Disabled
iv. Both Disabled
u. Call Assistant CLID –Sets the call information displayed in Call Assistant and applications using the
Allworx TSP driver.
i. Calling Party Information (caller ID)
ii. DNIS Information
4. After making changes to the preferences listed above, press the Select button .
5. Press the EXIT soft key twice.
6. Select the YES soft key to save any changes OR select NO to cancel changes made.
7.4 Reboot the Phone
On occasion, rebooting the phone may be required. For example, when the Allworx server System
Administrator makes changes to the phone’s configuration, it must be rebooted.
1. Select the CONFIG soft key.
2. Highlight Reboot Phone.
3. Press the Select button .
4. If you have any unsaved changes, you’ll be asked if you want to save them before rebooting. Select the
YES soft key to save any changes OR select NO to cancel changes made.
5. Select the YES soft key on the confirmation prompt to reboot.
To Next Page
Loading...
