Phone Guide – 9224
300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com
© 2008 Allworx. All rights reserved
Version 1. Revised: September 9, 2008
Page 20
k. Phone VLAN Settings – Option will appear if VLAN is enabled.
i. Enter VLAN ID – 2 (Default)
ii. Enter VLAN Priority – 7 (Default)
l. PC VLAN Settings – Option will appear if VLAN is enabled.
i. Enter VLAN ID – 1 (Default)
ii. Enter VLAN Priority – 0 (Default)
4. Select the EXIT soft key.
5. Select the YES soft key to save any changes OR select NO to cancel changes made.
7.8 Current Status / Info
1. Select the CONFIG soft key.
2. Highlight Current Status/Info.
3. Press the Select button .
4. The following information is listed:
• DHCP Lease Time (if DHCP is enabled)
• SNTP Time Server IP
• Boot Server IP
• Phone IP
• Subnet IP
• Gateway IP
• Boot Configuration success or failure
• MAC Address
• Model Name
• Software Version
• LAN Connection Info
• PC Connection Info
5. Use the Up / Down navigation arrows to move through the list.
6. When finished, press the EXIT soft key.
7.9 Check Statistics
1. Select the CONFIG soft key.
2. Highlight Statistics.
3. Press the Select button .
4. The following information is listed:
• Audio Packet Stats
- RCV
- XMT
- Missed
- Loss Rate
- Max Jitter
• SIP Call Stats