Shaw Almex Industries | 1.800.461.4351 | www.almex.com
7
49900-038Revised - April 2014
3. Hardware Overview CONTINUED
FIGURE 9 - LCD USER INTERFACE
3.14. WIRELESS PRESSURE SENSOR ANTENNA
Allows the Switchgear Box to connect to wireless pressure sensors,
that monitor the presses bag pressure in PSI. (SEE FIGURE 3) Two
wireless pressure sensors are included with SG1. (SEE FIGURE 10)
3.15. NETWORK MASTER INDICATOR
Indicates when two or more SG1’s are networked together. The
master SG1 LED reads solid. The network master indicator blinks
on the slave SG1(s). (SEE FIGURE 3)
SG1 BACK PANEL
3.16. LEFT AND RIGHT AUXILIARY RECEPTACLES
Used to power the ALMEX pressure pump. (SEE FIGURE 4)
3.17. UPPER & LOWER PLATEN RECEPTACLE (SET 1 & 2)
Powers two ALMEX platen sets. (SEE FIGURE 4)
3.18. SG1 NETWORKING RECEPTACLE
Networks up to four SG1s at a time. (SEE FIGURE 4)
3.19. POWER MAIN INPUT RECEPTACLE
Powers and activates the SG1. (SEE FIGURE 4)
FIGURE 10 - WIRELESS PRESSURE SENSORS & SCHRADER VALVES
3.20. WIRELESS PRESSURE SENSORS
& SCHRADER VALVES
Used to measure vulcanizer bag pressure. (SEE FIGURE 10)
FIGURE 14 - THERMOCOUPLE CABLES
3.24. THERMOCOUPLE CABLES
3.21. SPARE FUSES
FIGURE 11 - SPARE FUSES FIGURE 12 - POWER CABLE
3.22. POWER CABLE
FIGURE 13 - FRONT PANEL DUST COVER
3.23. FRONT PANEL DUST COVER
3.13. LCD USER INTERFACE
Allows the user to navigate SG1 features and has four input
buttons:
• MENU - navigates back to the HOME screen
• UP or DOWN - navigates to the different screen options
• ENTER - selects the desired option
When a numerical value must be entered in a menu option,
press ENTER, use the UP and DOWN buttons to increase or
decrease the number value in the given cell. Press ENTER
when the proper number has been inserted. When the final cell
contains the proper number, press ENTER to return to menu
selection. (SEE FIGURE 9)
SG1 STANDARD ACCESSORIES
SG1 OPTIONAL ACCESSORIES
To Next Page
Loading...