Alpha ESS SMILE5 - 2.4. Symbol Explanations

Safety
16
2.4. Symbols explanation
Symbols on the type label of the inverter:
Symbol
Explanation
Beware of a danger zone
This symbol indicates that the product must be additionally
grounded if additional grounding or equipotential bonding is
required at the installation site.
Beware of electrical voltage
The product operates at high voltages.
Beware of hot surface
The product can get hot during operation.
Danger to life due to high voltages in the inverter, observe a
waiting time of 5 minutes. Prior to performing any work on the
inverter, dis-connect it from all voltage sources as described in
this document.
WEEE designation
Do not dispose of the product together with the household
waste but in accordance with the disposal regulations for
electronic waste applicable at the installation site.
Observe the documentation
CE marking
The product complies with the requirements of the applicable
EU directives.
Certified safety
The product is TUV-tested and complies with the requirements
of the EU Equipment and Product Safety Act.
RCM (Regulatory Compliance Mark)
The product complies with the requirements of the applicable
Australian standards.
UKCA marking
The product complies with the regulations of the applicable
laws of England,Wales and Scotland.
RoHS labeling
The product complies with the requirements of the applicable
EU directives.