Alpha ESS SMILE5 - Mounting the Wifi Module

113 pages

Save Page as PDF

To Next Page

To Previous Page

Mounting

5.5.3. Mounting the WiFi Module

Remove the WiFi cover from the top of the inverter with Torx 20 screwdriver.

Tighten the WiFi module on the top.

Main Page

Disclaimer3
Copyright Statement4
Table of Contents5
Content5
Introduction9
Content and Structure of this Document9
Target Group9
Levels of Warning Messages10
Definition of Abbreviations and Nouns11
Safety12
Intended Use12
Safety Instructions for Battery13
General Safety Precautions13
Response to Emergency Situations13
Important Safety Instructions14
Symbols Explanation18
Product Introduction and Application Scenarios20
Nomenclature Introduction20
Product Description20
Inverter Electrical Interface Introduction20
Inverter Display Interface Introduction21
Battery Introduction27
Application Scenarios30
DC-Coupled Storage System31
AC-Coupled Storage System31
Hybrid-Coupled Storage System32
Storage and Transport33
Storage33
Inverter Storage33
Battery Storage33
Transport34
Mounting35
Checking the Outer Packing35
Scope of Delivery35
Requirements for Mounting37
Basic Requirements37
Mounting Environment Requirements37
Mounting Structure Requirements38
Mounting Angle and Stack Requirement38
Mounting Space Requirements39
Preparing Tools and Instruments40
Mounting the Product41
Mounting the Battery41
Mounting the Inverter46
Mounting the Wifi Module48
Electrical Connection49
Cable Requirements for Connection50
Connecting Additional Grounding51
AC Connection52
Requirements for the AC Connection52
Grid and Backup Connection53
CT Connection & Electricity Meter Connection55
Acrel Meter Connection55
PV Connection61
Electrical Connection between the Inverter and Battery Packs62
Electrical Connection between the Inverter and SMILE-Bat Series62
Electrical Connection between the Inverter and M4856-P63
AUX/LAN/PV-CT/DRM、RRCR/GRID-Ct、Meter/Rs485/Bms Connection64
Mounting the Inverter Cable Cover and Battery65
Installer Account Register and Install New System67
Register on APP67
Download and Install APP67
Register as Installer Account67
Overview of Functions for Installer Account68
Install New Systemaustralian Installer69
Regiter on Alphacoud71
Register as Installer Account71
Install New System72
Powering on and off the System74
Powering on the System74
Powering off the System74
Commissioning75
Checking before Power-On75
Powering on the System75
Wifi Module Configuration and Parameter Settings76
Wifi Configuration76
Direct Commissioning on Wifi Configuration81
Installing New System and Settings on the APP84
Download and Install the APP84
Register as an Installer84
Install New System84
Check the Running State On-Line86
Check the Charging Function of the Product86
Check the PV Generation and Discharging Function of the Product88
Check the UPS State of the Product89
Instruct the End User to Install the APP89
Maintenance and Troubleshooting90
Routine Maintenance90
Troubleshooting91
Inverter Error Troubleshooting91
Battery Protection Description103
Battery Error Description104
Uninstallation & Return105
Removing the Product105
Packing the Product105
Disposing of the Product105
Specification106
Datasheet of Inverter SMILE5-INV106
Datasheet of Battery108
Appendix 1: System Overview111
Appendix 2: Regional Application Standard112

Alpha ESS SMILE5 - Mounting the Wifi Module

Table of Contents

Other manuals for Alpha ESS SMILE5

Related product manuals