Alpha ESS SMILE5 - 5.4. Tools and Instruments Preparation

Mounting
38
5.4. Preparing Tools and Instruments
Category
Tools and Instruments
Installation
Hammer drill (with a Ф10
mm drill bit)
Torque socket wrench
SW10
Multimeter (DC voltage
range ≥ 1000 V DC)
Diagonal pliers
Wire stripper
T20 screwdriver
(torque range: 0-5 N m)
L＜200mm
Rubber mallet
Utility knife
Cable cutter
Crimping tool (model:
PV-CZM-22100)
Cord end terminal
crimper
Disassembly and
Assembly Tool of PV
connector
Vacuum cleaner
Heat shrink tubing
Heat gun
Marker
Measuring tape
Bubble or digital level
Personal
Protective
Equipment
Safety gloves
Safety goggles
Anti-dust respirator
Safety shoes