23
We reserve the right to modify technical specifications without prior notice.
UK830532/200610 © Alpha-InnoTec GmbH
The heat pump system will be commissioned by
customer service personnel authorized by the
manufacturer. There is a fee for commissioning!
safetytemperaturelimiter
A safety temperature limiter is built into the electric
heating element (depending on model). In the event of a
malfunction in the heat pump or air in the system, check
whether the reset button of the safety temperature lim-
iter has tripped. If this is the case, push in the button.
1 Safety temperature button on
electric heating element
2 Reset button
Dismantling
DANGER!
Danger of fatal injury due to electric
current!
Electrical connections may be installed
only by qualied electricians.
Before opening the unit, disconnect the
system from the power supply and secure
it from being switched back on!
DANGER!
Danger of fatal injury due to electric cur-
rent!
Only qualied electrical technicians are
allowed to disconnect the unit from the
power supply and de-install all electrical
connections.
DANGER!
Only qualied heating or cooling system
technicians are allowed to remove the unit
from the system.
DANGER!
Only qualied cooling system technicians
are allowed to dismantle the unit and its
components.
CAUTION.
Recycle or provide for proper disposal of
unit components, refrigerants and oil in
accordance with the applicable regula-
tions, standards and directives.
removalofthebufferbattery
CAUTION.
Before scrapping the heating and heat
pump regulator, remove the buffer bat-
tery on the processor board. The bat-
tery can be removed using a side cutter.
Dispose of battery and electronic compo-
nents in keeping with environmental con-
siderations.
To Next Page
Loading...
Need help?
General
