EasyManua.ls Logo

Alpha-InnoTec LWDV - Disposal; Avoid Material Damage

Alpha-InnoTec LWDV
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
Subject to technical amendments without prior notice | 83055800cUK – Translation of the operating manual | ait-deutschland GmbH
2.5 Disposal
Environmentally hazardous media
Improper disposal of environmentally hazardous me-
dia(refrigerant)willdamagetheenvironment:
Collect media safely.
Dispose of the media in an environmentally sound
manner in accordance with the local regulations.
2.6 Avoid material damage
The ambient air at the heat pump’s installation site and
the air drawn in as a heat source must not contain any
corrosive components!
Constituents such as:
Ammonia
Sulphur
Chlorine
Salt
Sewagegases,uegases
can cause damage to the heat pump, which can even
result in the complete failure/total loss of the heat pump.
Decommissioning/draining the heating
If the system/heat pump is decommissioned or drained
after already being lled, it must be ensured that the
condenser and any heat exchangers have been
drained completely in the event of freezing tempera-
tures. Residual water in heat exchangers and con-
densers can result in damage to the components.
Completely drain the system and the condenser,
and open vent valves.
Blow them clear with compressed air, if required.
Improper action
Requirements for minimum scale and corrosion dam-
age in hot water heating systems:
Professional planning and commissioning
Closed system with regard to corrosion
Integration of an adequately dimensioned pres-
sure maintenance
Use of demineralized water heat-
ing water or VDI 2035 water
Regular servicing and maintenance
If a system is not planned, commissioned and operated
in accordance with the given requirements, there is a
risk of the following damage and malfunctions:
Malfunctions and failure of components, e.g. pumps,
valves
Internal and external leaks, e.g. at heat exchangers
Reduction in cross-section and blockages in com-
ponents, e.g. heat exchangers, pipes, pumps
Material fatigue
Gasbubble and gascushion development (cavi-
tation)
Negativee󰀨ectonheattransfer,e.g.duetoforma-
tion of deposits, and associated noises, e.g. boiling
noises,ownoises
Observe the information in this operation manual
for all work on and with the device.
Unsuitablequalityofthewaterforllingand
replenishing the heating circuit
Thee󰀩ciencyofthesystemandtheservicelifeofthe
heat generator and the heating components depend
decisively on the quality of the heating water.
Ifthesystemislledwithuntreateddrinkingwater,cal-
cium deposits will form as scale. Limescale deposits ac-
cumulate on the heat transfer surfaces of the heating.
E󰀩ciencyisreducedandenergycostsincrease.Inex-
treme cases, the heat exchangers will be damaged.
Fill the system only with demineralized heating
water or VDI 2035 water.

Table of Contents

Related product manuals