Alpha ARES 440 Tec - Connecting the Boiler

21
F
F
G
F
RM
A
C
B
A
3.8 CONNECTING THE BOILER
e ARES Tec ErP boiler leaves the factory set up for
the hydraulic (ow and return) and gas connections
located on the le side of the boiler.
To fasten the ue exhaust manifold use the screws
and gaskets contained in the accessory kit box and a
10 mm socket key.
e ue exhaust manifold is set up on the LEFT SIDE.
It is also possible to set up the outlet on the RIGHT
and REAR SIDE.
Diaphragms and gaskets.
Diaphragm installed on the rst and last element of the ow manifold
Ø 18 (A), internal Ø 27 (B).
Gaskets installed on all of the other elements (C).