Service manual AlphaCom XL transceiver Rev. 1.4 10-08-2011 Blz. 17/74
Jumpers J10, J16, J22 and J27 are illustrated in the right-hand
position indicating that the outputs operate as an Open Collector
(o.c.) output. The relays are not used in this position.
Attention: when using this option jumpers J8, J15, J17 and J23 should NOT be placed!
When using this option you must take into consideration that the maximum current drain per Open Collector
(o.c.) output should not exceed 100mA per Open Collector output.
To Next Page
Loading...