Service manual AlphaCom XL transceiver Rev. 1.4 10-08-2011 Blz. 45/74
After logging off or after programming factory defaults the following screen will appear. In this screen the
fixed IP address of the AlphaCom XL will be displayed. After restarting the AlphaCom XL web browser
can be reached through this IP address.
If the AlphaCom XL uses DHCP it could be possible that the DHCP server issues a new IP address to the
AlphaCom XL during start-up. In this case the Alphatronics Equipment Discovery Tool can be used to find
the new IP address.
To Next Page
Loading...