Alpine Spas MUNRO - Pre-Fill Procedure

11
Spa Pool Cover Lifter (Optional Extra)
Thecoverlifterneedstobeassembledontothespapool,pleasefollowthe
instructionscarefully.Somebracketsmayneedtobesecuredontothespapool
cabinet.Certainsetupsmayhaverestrictions-seeour‘CoverLifterInstallation
Guide’forconrmation.
Downloadthe‘CoverLifterInstallationGuide’fromoursupportpage:
http://alpinespas.co.nz/support/
Steps to Prepare for Filling:
PRE-FILL PROCEDURE
STOP!! BEFORE FILLING, START HERE!
FAILING TO FOLLOW THIS PROCEDURE MAY RESULT
IN ISSUES STARTING UP THE SPA POOL OR VOIDING WARRANTY.
Checkthesilverplaqueonthe
sideofspapoolcabinet(orsee
yourinvoice)tondyourspapool
model’sname,thenreadpages30
-61formorespecicinfoabout
yourspapool.
Checktheexternaldrainvalve
isinthe‘ow-locked’position
(retracted)withtheinnertwistcap
screwedintight.
As the spa pool has been water
testedduringmanufacture,
excesswaterresiduemayhave
splashedoutfromwithinthe
pipesduringtransportandmay
requireaquickwipe.
Open all of the spa pool jets by
turningthemanti-clockwise.This
willallowwatertoowthroughall
pipeswhenllingandhelpavoid
air-locks.
1
4
2
3