Alpine Spas MUNRO - Page 25

25
The‘PUMP’button/swillactivatethejetpump/sandhighpressuredwaterwillow
fromthejetpieces.Turnthediversionvalvestoswitchpressurebetweenseats.
Testing the Components (Jet Pumps)
Turneachindividualjetpieceinsidethespapoolanti-clockwisetoopentheow.
Thentestthejetpump(s)viathetopsidecontrolpanelbypressing:
PUMP
Setting the Time & Date
Besuretosetthecorrectdateandtimeonthetopsidecontrolpanel.Vital
functionssuchasltration,sanitisationcyclesandpowersavingsettingsare
dependentonthisbeingaccurate.
NavigatetotheTIMEdisplaybyfollowingtheinstructionsonthepreviouspage
('UnderstandingtheDisplay')thenfollowthesestepstosetthetime:
From the TIME
display, press the
‘OK’ button to edit
time parameters.
To set the
preference and to
proceed, press the
‘OK’ button.
The rst parameter
is time format. Select
between 12/24hr with
‘UP/DOWN’ buttons.
Continue through the
remaining parameters
selecting with ‘UP/
DOWN’ and conrming
with ‘OK’.
Time & Date Parameters in order: Time Format (12/24 hr) Year (yyyy) Month (mm) Day (dd) Weekday (mon - sun) Hours (xx:oo) Minutes (oo:xx)
Spa Pool Behavior - Running Modes
Yourspapoolispre-setto‘NORM’(normal)runningmodebydefaultwhichisthe
standardoperatingmodeandit’srecommendtoleavethisunchangedasitisthe
mosteconomicalmodeforregularuse.Normalmodemeansthatthespapoolwill
alwaysaimtokeepthewatertemperatureattheuserssettemperature(default
38°C)soitisreadytousewheneveryouare.
Othermodesareavailabletouse,whichmaybeusefulatdifferenttimesofthe
yearorifyoucannotusethespapoolforasetperiodoftime:
Name Mode Function
NORM Normal Normaloperationfordemandheatingandltration
AWAY Away DemandheatingisDISABLED.Filtrationisxedat1hourperday(the
keypadwillscroll“AWAYMODE”every60secs)
WEEK Week MondaytoThursday:DemandheatingisDISABLEDandltration
xedat1hourperday.FridaytoSunday:NormalOperation
Changing the Running Mode
Fromanydisplaymode:
Press the ‘UP/DOWN’
buttons together.
The word [MODE] will
display.
Select between the
available modes
with the ‘UP/
DOWN’ buttons.
Press the ‘OK’
button to enter
the [MODE]
adjustment.
Press ‘OK’ to
conrm and save
the mode setting.