USING VOICE RECOGNITION
1
26 - General information
The system displays the number
indicated, say "Dial" to call the number
or "Correct/"Back" to dictate another
number.
Voice control can also be used to view
your call log and read an "SMS".
Press the voice command button
to display the voice command main
menu.
After the sound signal, say one of the
following:
– "Call log" or "Recent calls";
or
– "Read SMS" or "Display SMS".
Note: only "SMS" received while
driving can be read.
« Help »
For more information on using the
voice functions, press the voice
command button and say "Help".
The "Help" function is available at all
times. For example, if you are on
the "Phone" screen and you say
"Help", the synthetic voice will help you
to use the function.
Using the phone's voice
recognition with the multimedia
system
To use your phone's voice recognition
system with your multimedia system,
you should:
– connect your phone to the
multimedia system (refer to the section
on "Connecting, disconnecting a
phone");
– ensure that your phone has a voice
recognition function compatible with
your multimedia system.
Note: if your phone's voice recognition
function is compatible with the
multimedia system, the
5
symbol
appears from the "Paired devices list"
menu.
Note: if your phone's voice recognition
function is compatible with the
multimedia system, the
1
symbol
appears from the "Paired devices list"
menu.
For more information, please refer to
"Connecting, disconnecting a
telephone".
Note: if you wish to use your phone's
voice recognition with the multimedia
system, make sure that you are
located in area with network coverage.
To activate/deactivate your phone's
voice recognition system with the
multimedia system, press and hold
your vehicle's voice recognition button.
of your vehicle.
To activate your multimedia system's
voice recognition system, press the
To Next Page
Loading...
