Alpine A110 - Page 27

USING VOICE RECOGNITION
1
General information - 25
– "X station", with X as the radio
station name;
or
– "Station" followed by the desired
radio frequency. e.g. for "91.8 station",
say "91.8 station".
"Music" control with voice
recognition
You can play music (an audio track,
playlists, etc.) using the voice
command included with your
multimedia system. Possible auxiliary
audio sources:
– "USB" (USB port);
– "AUX" (Jack socket).
Press the voice command button
to display the voice command main
menu.
After the sound signal, say one of the
following:
– "Play artist" followed by the name of
the artist;
or
– "Play track" followed by the name of
the track;
or
– "Play album" followed by the name
of the album;
or
– "Play genre" followed by the genre;
or
– "Playlist" followed by the name of
the playlist.
Depending on the source selected,
you can:
– play the next/previous track;
or
– play all titles/display the music list.
"Change audio source"
From the main menu you can change
the audio source.
Press the voice command button
to display the voice command main
menu.
After the sound signal, say "Play"
followed by the name of the source:
– "Play USB";
or
– "Play FM";
or
– "Play Bluetooth®".
Using a telephone with voice
recognition
It is possible to call a number or a
contact using the voice control
included with your multimedia system.
Press the voice command button
to display the voice command main
menu.
After the sound signal, say one of the
following:
– "Call" followed by the name of the
contact that you wish to call;
or
– "Dial" followed by the telephone
number that you wish to call.
Note: it is recommended to dictate the
numerals either one at a time or two at
a time.