UPDATING THE SYSTEM AND MAPS
5
86 - Apps
USB flash drive from your computer,
ejecting it before removing it, then go
to your vehicle.
From your vehicle, insert the USB
flash drive into your vehicle's USB
port. The multimedia system detects
new apps and offers to install them.
Follow the instructions shown on the
multimedia system screen.
This updating procedure must be
carried out while the engine is
running in the case of combustion
vehicles and with the engine on in
the case of hybrid and electric
vehicles.
Note: once the USB flash drive has
been inserted into your vehicle's USB
port, do not carry out any operation on
the multimedia system, its controls or
on any vehicle devices (telephone,
audio, navigation, etc.) to avoid
interrupting the updating process.
When the update procedure is
complete, you can remove the USB
flash drive from your vehicle.
Do not park the vehicle
or run the engine in
locations where
combustible substances
or materials such as grass or
leaves can come into contact with
the hot exhaust system.
Never run the engine in
an enclosed space as
exhaust gases are
poisonous.
To Next Page
Loading...
