EasyManua.ls Logo

Alpine A110 - Page 94

Alpine A110
118 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ALPINE TELEMETRICS
6
92 - Vehicle
"Pressure gauges" 5
This function can be used to display
one
5
or two
6
customisable pressure
gauge widgets from the vehicle
settings.
Pressure gauge settings
To customise the pressure gauges,
press one of pressure gauges
displayed on the multimedia system
screen and select the desired setting.
For safety reasons, carry
out these operations
when the vehicle is
stationary.
You can choose to display the
following settings:
"Torque";
"Power";
"Turbo pressure";
"Oil temperature";
"Oil pressure";
"Brake pressure";
"Water temperature";
« Speed » ;
"Steering wheel angle";
"Side acceleration";
"Accelerator pedal percentage";
"Temperature of clutches";
"Engine speed".
"Torque" (Nm)
Indicates the available torque level (in
Newton-metre).
"Power" (ch)
Shows the engine power in real time
(in horsepower DIN).
"Turbo pressure" (mBar)
Indicates the use of the turbocharger
in real time and the available
turbocharging reserve (in millibar).
"Oil temperature" (°C or °F)
Indicates the temperature (in degrees
Celsius or Fahrenheit) of the oil
contained in the engine.
"Oil pressure" (bar)
Shows the pressure (in bars) of the oil
contained in the engine. The pressure
must always be over 0.7 bar.
"Brake pressure" (bar)
Shows the pressure (in bar) in the
braking circuit. The higher the
pressure, the more powerful the
braking will be.
"Water temperature" (°C or °F)
Indicates the temperature (in degrees
Celsius or Fahrenheit) of the coolant.
Note: the operating temperature must
be below 115 °CIf the temperature is
higher, a message appears on the
instrument panel.
"Speed" (km/h or mph)
Indicates the vehicle speed (in
kilometres per hour or miles per hour).
"Steering wheel angle" (°)
Indicates the angle of the steering
wheel (in degrees).
"Side acceleration" (G)
Indicates the transverse and
longitudinal accelerations (in " G »).
"Accelerator pedal percentage" (%)
Indicates the position to which the
accelerator pedal is pressed as a
percentage (from 0 to 100).
"Temperature of clutches" (°C or °F)

Related product manuals