ALPINE TELEMETRICS
6
Vehicle - 93
Indicates the temperature (in degrees
Celsius or Fahrenheit) of the clutch
system.
"Engine speed" (RPM)
Indicates the engine speed (in rpm).
"Bar charts"
This function displays six customisable
bar charts.
Bar chart settings
To customise the display of the bar
charts, press either one of the six bar
charts
7
displayed on the multimedia
system screen and select the desired
setting.
You can choose to display the
following settings:
– "Torque";
– "Power";
– "Turbo pressure";
– "Oil temperature";
– "Oil pressure";
– "Brake pressure";
– "Water temperature";
– « Speed » ;
– "Steering wheel angle";
– "Side acceleration";
– "Accelerator pedal percentage";
– "Gearbox oil temperature";
– "Temperature of clutches";
– "Engine speed".
"Torque" (Nm)
Indicates the available torque level (in
Newton-metre).
"Power" (ch)
Shows the engine power in real time
(in horsepower DIN).
"Turbo pressure" (mBar)
Indicates the use of the turbocharger
in real time and the available
turbocharging reserve (in millibar).
"Oil temperature" (°C or °F)
Indicates the temperature (in degrees
Celsius or Fahrenheit) of the oil
contained in the engine.
"Oil pressure" (bar)
Shows the pressure (in bars) of the oil
contained in the engine. The pressure
must always be over 0.7 bar.
"Brake pressure" (bar)
Shows the pressure (in bar) in the
braking circuit. The higher the
pressure, the more powerful the
braking will be.
"Water temperature" (°C or °F)
Indicates the temperature (in degrees
Celsius or Fahrenheit) of the coolant.
Note: the operating temperature must
be below 115 °CIf the temperature is
higher, a message appears on the
instrument panel.
"Speed" (km/h or mph)
Indicates the vehicle speed (in
kilometres per hour or miles per hour).
"Steering wheel angle" (°)
Indicates the angle of the steering
wheel (in degrees).
"Side acceleration" (G)
Indicates the transverse and
longitudinal accelerations (in " G »).
"Accelerator pedal percentage" (%)
Indicates the position to which the
accelerator pedal is pressed as a
percentage (from 0 to 100).
"Gearbox oil temperature" (°C or °F)
Indicates the temperature (in degrees
Celsius or Fahrenheit) of the oil
contained in the gearbox.
"Temperature of clutches" (°C or °F)