EasyManuals Logo

Alpine CDE-183BT User Manual

Alpine CDE-183BT
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #35 background imageLoading...
Page #35 background image
35-EN
Displaying the Text
You can display the tag information of a song in the iPod/iPhone.
Press VIEW.
Each press changes the display.
Note
When the TEXTSCROLL is set to MANUAL, press and hold VIEW for
at least 2 seconds, the current text will be scrolled one time.
TRACK NO./ELAPSED TIME ARTIST NAME
*
ALBUM NAME
*
SONG TITLE
*
TRACK NO./CLOCK TRACK NO./ELAPSED TIME
* TAG information
“ARTIST”/“ALBUM”/“SONG” is displayed if there is no tag
information.
Notes
The maximum number of characters for the head unit is 70 (70 byte).
Some characters may not be correctly displayed.
In Case of Difficulty
If you encounter a problem, please turn the power off, then on again. If
the unit is still not functioning normally, please review the items in the
following checklist. This guide will help you isolate the problem if the
unit is at fault. Otherwise, make sure the rest of your system is properly
connected or consult your authorised Alpine dealer.
No function or display.
Vehicles ignition is off.
If connected following instructions, the unit will not operate with
the vehicle’s ignition off.
Improper power lead (Red) and battery lead (Yellow) connections.
Check power lead and battery lead connections.
•Blown fuse.
Check the fuse of the unit; replace with the proper value if
necessary.
Internal micro-computer malfunctioned due to interference noise
etc.
–Press the RESET switch with a ballpoint pen or other pointed
article.
Unable to receive stations.
No antenna or open connection in cable.
Make sure the antenna is properly connected;
replace the antenna or cable if necessary.
Unable to tune stations in the seek mode.
You are in a weak signal area.
Make sure the tuner is in the DX mode.
If the area you are in is a primary signal area, the antenna may not be
grounded and connected properly.
Check your antenna connections; make sure the antenna is
properly grounded at its mounting location.
The antenna may not be the proper length.
Make sure the antenna is fully extended; if broken, replace the
antenna with a new one.
Broadcast is noisy.
The antenna is not the proper length.
Extend the antenna fully; replace it if it is broken.
The antenna is poorly grounded.
Make sure the antenna is grounded properly at its mounting
location.
CD Player not functioning.
Out of operating temperature range +50°C (+120°F) for CD.
Allow the vehicles interior (or trunk) temperature to cool.
CD playback sound is wavering.
Moisture condensation in the CD Module.
Allow enough time for the condensation to evaporate (about
1 hour).
CD insertion not possible.
A CD is already in the CD player.
Eject the CD and remove it.
Information
Basic
Radio
CD

Table of Contents

Other manuals for Alpine CDE-183BT

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Alpine CDE-183BT and is the answer not in the manual?

Alpine CDE-183BT Specifications

General IconGeneral
MP3 playbackYes
DVD Audio playbackNo
Playback disc formatsCD audio
Audio formats supportedAAC, MP3, WMA
DIN size1 DIN
Impedance10 Ω
Product colorBlack
Volume controlRotary
Frequency range5 - 20000 Hz
Disc types supportedCD, CD-R, CD-RW
Audio output channels4.0 channels
Equalizer bands quantity9
Maximum power per channel50 W
Signal-to-Noise Ratio (SNR)105 dB
Display typeLCD
Display number of lines1 lines
FM band range87.5 - 108 MHz
LW band range153 - 281 kHz
Supported radio bandsFM, LW, MW
Preset stations quantity30
USB version2.0
Bluetooth version2.1+EDR
Bluetooth profilesA2DP, AVRCP, HFP, HSP, OPP, PBAP, SPP
USB ports quantity1
Headphone connectivity3.5mm
Menu languagesDEU, DUT, ENG, ESP, FRE, ITA, RUS
File format systemFAT 16/32
Key illumination colorMulti
Weight and Dimensions IconWeight and Dimensions
Weight1400 g
Dimensions (WxDxH)170 x 46 x 25 mm

Related product manuals