10
Before Using The System
Once the route setting has been performed and
travelling started, the navigation system provides
the driver all of the major route information with
real time voice directions and guidance displays.
You can manually select the desired guidance
displays for your convenience.
The Current Vehicle Position Display is automati-
cally displayed when travelling starts. Pressing the
4 or 3 button on the remote control while the
map is being displayed the map will be zoom in or
out. To return to the current vehicle position
screen display from other screen displays, press
the POS. button.
How to switch the map displays
3-D Display for
Motorway Junction
Motorway junction
During navigation, when your vehicle ap-
proaches an intersection, the Zoomed Intersec-
tion Map of that intersection is displayed. This
enlarged Intersection Map gives you further
information via voice guidance.
(Sometimes, the enlarged crossroads map is
displayed even when you are going to go
straight.)
Zoomed Intersection
Map Display
• Ordinary Road:
Name of next road
ahead.
• Motorway:
Name of next
junction ahead.
Distance to the intersection
Dual - Screen Display
Right screenLeft screen
Current Vehicle
Position Display
Scale
The distance between
the arrows on the screen
is 400 metres ( mile).
1
4
←→
400 m
Distance to the
destination
Map orientation
Shows the map orientation for
up on the current map.
N : North
: North up
: Heading up
*GPS signal state
No icon: No satellite information being received
or satellite signals are being calculated.
Icon is displayed: Receiving GPS signals
(in 2-dimentional or 3-dimentional).
Estimated required time.
Current vehicle position icon.
Information on the next
intersection.
Route.
Street name.
(The arrowhead shows the
direction of north. To change
the map orientation, see page
12.
Point Display
Distance
in a straight
line from the
current
vehicle
position.
Operation
guide
Reticule icon
Note:
Applicable to some areas in
Germany and UK only.
←
→
To Next Page
Loading...
