13
EN
Deciding the route
Basic Operation
There are three procedures to decide an appropri-
ate route to your desired destination; searching for
the location, searching for the route, and deciding
the route.
This section describes the operational procedures
when a destination is searched for using its
address as an example.
Press the MENU button on the
remote control to display the main
menu.
Select (highlight) "Destination" from
the main menu by tilting the joystick
on the remote control and press the
ENTER button on the top of the
joystick.
The Destination search menu
automatically appears. Select
"Address" from the Destination
search menu by tilting the joystick
and press the ENTER button.
Note:
When you search for a location in another
country (area), you should change the search
country (area). In this case, select "Change"
by tilting the joystick and press ENTER. The
Search area menu appears, select the
desired area (country) by tilting the joystick
1
2
3
and press ENTER. (Select the 8 or 9
indicator on the display and press ENTER to
scroll the area list.) When you have selected
the desired area, choose "OK" by tilting the
joystick and press ENTER.
The street or town name input
alphabet table automatically
appears. Tilt the joystick to select
the desired character for the first
position of the street name and
press ENTER. The input character
appears at the first position of the
text window. Repeat this procedure
to input the entire street name.
Tips:
• When 1 character is input, the candidates for
the next character are narrowed down.
• Selecting "/" returns to the previous
numeral and erases it.
When the street name inputtings
have been completed, the list of the
input street names appears. Select
the desired street name by tilting the
joystick and press ENTER.
(To be continued)
4
Searching
country
(This example
shows when
Germany is
selected.)
5
To Next Page
Loading...
