Alpine NVE-N077PS - Route Editing; Adding Destinations; Reordering Destinations

30
Reordering destinations
Route Editing
Adding destinations
This operation is for setting multiple destinations
for the same journey (up to 5).
Press MENU button to display the
main menu. Select "Edit route" from
the main menu by tilting the joystick
and press ENTER.
The "Edit route" screen appears.
Select "Add" under "Destination" by
tilting the joystick and press ENTER.
The Destination searching screen is
displayed. For details of searching
for the desired destinations, see
pages 18 to 25.
When the map showing the area of
the selected destination with the
point setting menu is displayed,
select "Enter" by tilting the joystick
and press ENTER.
The Add Destinations screen
showing the sequence of the
destinations is displayed. Select
"Add" at the place where the new
destination should be added by
tilting the joystick and press ENTER.
Note:
To add more destinations (up to 5 in all),
repeat this procedure.
When you have set all the
destinations, select "OK" by tilting
the joystick and press ENTER.
1
4
2
5
6
3
The sequence of the destinations to go can be
changed in any order you like.
Press the MENU button to display
the main menu. Select "Edit route"
from the main menu by tilting the
joystick and press ENTER.
The Edit route screen appears.
Select "Reorder" under
"Destination" by tilting the joystick
and press ENTER.
The list of the Input destinations
appears. Select the destinations one
by one in the desired sequence of
arrival by tilting the joystick and
pressing ENTER.
When the sequence of the
destinations has been changed,
select "OK" by tilting the joystick
and press ENTER.
When the settings have been
completed, select "OK" by tilting the
joystick and press ENTER.
1
4
2
3
5